1 5-BUTTON 2-WAY PAGER

1 ANTENNA UNIT WITH WIRING

1 ALARM UNIT WITH MOTION TILT SENSOR

2 HOOK & LOOP STRIPS

1 MOUNTING BRACKET

1 3-BUTTON REMOTE TRANSMITTER

2 SQUARE HEAD BOLTS

2 HEX NUTS

2 PHILLIPS/HEX HEAD SCREWS

2 SMALL LOCK WASHERS

2 LARGE LOCK WASHERS

2 SMALL FLAT WASHERS

2 LARGE FLAT WASHERS

2 PLASTIC WIRE TIES

1 LED WARNING LIGHT

Tools Needed for Installation

ADJUSTABLE WRENCH OR A PAIR OF PLIERS PLUS A DRILL AND AN 8MM DRILL BIT FOR LED WARNING LIGHT INSTALLATION. THE GORILLA CYCLE ALARM IS DESIGNED FOR SIMPLE INSTALLATION.

2-way Paging Features

The paging unit is designed to alert you when either of the following sensors are activated.

1. Current Sensor

2. Tilt Sensor

3. Shock Sensor

4. Warn Away

The alarm and 2-way paging system have a transmission range of up to1/2 mile. If the system is interrupted by strong radio frequency, high voltage electrical power or obstacles like tall buildings, the transmission range may be shorten*.

*If the system is interrupted by strong radio frequency, high voltage electrical power or obstacles like tall buildings, the transmission range may be shorten.

Download the Remote Control Motorcycle Alarm System Installation & Operation Instructions

• Built-in 2-way pager
• Powerful 120dB Piezo 5-tone siren
• 2-stage shock sensor
• Motion tilt sensor
• Current Sensor
• L.E.D. warning light
• Simple installation takes less than 30 minutes
• Compact size fits virtually any motorcycle
• Accepts up to 3 transmitters
• Pager displays alarm functions from up to 1/2 mile away
• All alarm features are displayed on the pager's L.E.D. screen: current sensor, tilt sensor, shock sensor, clock, warn-away mode, screen lamp, range indicator, power-save button, lock and pager vibration mode
• Multiple pager capability up to 3 pager